Reduce the temperature of your brakes with our OEM+ Brake Duct solution!
Designed to replace the sub optimal OEM air guides on the M-Sport front bumper, our bespoke brake ducts channel air from the front of the vehicle, allowing you to maximise brake cooling efficiency, increasing pad and disc life whilst reducing brake fade.
Our design perfectly fits the E81 & E87 M-Sport front bumper requiring zero modifications. Simply apply adhesive such as Sikaflex 221 to the bead provided in the duct and secure to the back of the bumper.
We also integrated a small bead in the design ensuring the hose is a snug fit and can be attached with a simple cable tie, although a jubilee clip or similar can still be used if preferred.
These are designed to suit the commonly available 2.5" (63.5mm) ID hose.
When purchasing this item you will receive two brake ducts (LH & RH).
This product does require modification of the stock wheel arch liners to be able to route the hose from the brake ducts to the brake disc backing plates.
This product is 3D printed on one our large platform 3D printers. We use the very best carbon fibre reinforced nylon filament to ensure that heat, UV & cleaning chemicals will not have any impact on the finished product, and that it can survive the hostile environment of an all-out race car.
Given the nature of 3D Printing some small imperfections are possible. Where imperfections are present it is normally in a non-visible area and has no detriment to the function of the product. However, if there is any cause for concern, please contact us before fitting the product and we will assist.
Whilst we try to ensure that we have a stock of ducts available in our UK & German offices, at times these parts are made to order and therefore can be subject to up to one week delay prior to shipping. If you have any questions regarding delivery times please get in touch with us here prior to ordering.
The product shown in the images is and early prototype to suit a 2" hose. Therefore the product received will differ slightly from that pictured.
To make full use of this product hose will be required to be purchased separetly such as the Revotec Hose available from Merlin Motorsports in the UK. Modification to the brake disc backing plates will also be required to attach the other end of the hose. The recommended adhesive of choice is Sikaflex 221, this is not included.