This is a PRE-ORDER, items will be shipped week commencing October 26th.
Reduce the temperature of your brakes with our OEM+ Brake Duct solution!
Designed to replace the factory fog lights on the NBFL front bumper, our bespoke brake ducts channel air from the front of the vehicle, allowing you to maximise brake cooling efficiency, increasing pad and disc life whilst reducing brake fade.
Our design perfectly fits the NBFL bumper requiring zero modifications. Picking up on the OEM mounting points for the fog lights and re-using the original screws. We also integrated a small bead in the design ensuring the hose is a snug fit and can be attached with a simple cable tie, although a jubilee clip or similar can still be used if preferred.
Available to suit 2.5" (63.5mm) and 3" (76mm) ID hose, please select which size is required from the drop down menu. When purchasing this item you will receive two brake ducts (LH & RH). Free delivery on all UK Mainland orders.
2.5" hose is compatible with OEM undertrays requiring little to no modification even with 15x9" wheels with an appropriate offset. 3" hose will require modification to the undertray or a custom solution.
This product is 3D printed on one our large platform 3D printers. We use the very best carbon fibre reinforced nylon filament to ensure that heat, UV & cleaning chemicals will not have any impact on the finished product, and that it can survive the hostile environment of an all-out race car.
Given the nature of 3D Printing some small imperfections are possible. Where imperfections are present it is normally in a non-visible area and has no detriment to the function of the product. However, if there is any cause for concern, please contact us before fitting the product and we will assist.
Whilst we try to ensure that we have a stock of ducts available in our UK & German offices, at times these parts are made to order and therefore can be subject to up to one week delay prior to shipping. If you have any questions regarding delivery times please get in touch with us here prior to ordering.
The product shown is the 2.5" version. The ducting shown in the pictures is for illustration purposes only and is not supplied with this product. To make the most of the product, aftermarket brake disc backing plates will be required and suitable hose such as MX5 Mods Brake Ducts and Revotec Hose.